Features
1. Effectively avoid blind spots at the rear of the vehicle and enhance driving safety. It can make the driver stay alert when changing lanes and avoid side collisions.
2. As long as there are moving objects ejected from the rear of the vehicle, the LED lights will light up or flash, and the buzzer will sound.
3. Longdistance detection, the system can detect objects in the blind area 30m behind the vehicle.
4. 24Ghz working frequency band, high sensitivity and stable performance. IP67 waterproof rating, not easy to be damaged.
5. This system includes four functions: BSD, LCA, RCT, and AOA. Its unique ability to penetrate smoke, fog, and dust can be applied allweather and allday.
Specification
Item Type: Blind Spot Detection System
Material: ABS
Working Frequency: 24Ghz
Voltage: 8V-36V
Power Consumption: <3W
Working Temperature: -40- +85
Waterproof Rating: IP67
Distance Resolution: 0.5m
Ranging Accuracy: Better than 0.18m
Detection Distance: Approx. 30m/98.43ft
Alarm Method:
Method 1: The LED light is on.
Method 2: The LED flashes and the buzzer sounds.
This system provides early warning of dangerous targets in adjacent lanes on the left and right. This system includes four functions: BSD, LCA, RCT, and AOA. Its unique ability to penetrate smoke, fog, and dust can be used all-weather and all-day, detecting objects in the signal area in real time, and calculating 64 objects at the same time. Speed, angle and relative displacement. It can detect targets up to 30M away, and finally output an alarm signal. The alarm signal includes a first-level alarm and a second-level alarm.
System Features
(1) The system adopts adaptive signal processing and target recognition methods to effectively filter out the false alarms caused by low-speed vehicles, stationary guardrails, trees and other targets in the monitoring area, and only alarms for moving targets with a speed greater than 10km/h;
(2) The system uses multi-channel interference technology to accurately measure the distance, speed, and angle of the target, and does not alarm the target outside the alarm area (such as a moving vehicle across the lane);
(3) Alarm for moving targets in the alarm area, including targets approaching, following (the same speed as the vehicle), and far away;
(4) When there is a moving target that meets the alarm conditions in the alarm area, the alarm indicator lights up. At this time, if the driver forces the turn signal to turn, the alarm indicator flashes and the alarm horn sends out an alarm:
(5) The mutual communication technology of dual radars allows the radar to calculate its own speed more accurately.
Features:
- BSD blind zone warning (detection area: horizontal 4 meters, vertical 10 meters)
Working logic: start at own vehicle speed>18KM/hour
BSD warning mode:
A. When a target with a speed> 10KW/hour enters the detection area (the vehicle does not turn on the turn signal), a first-level alarm is generated, and the alarm is cancelled until the target leaves the detection area;
B. When a target with a speed> 10K/hour enters the detection area (the vehicle turns on the turn signal), a secondary alarm is generated, and the alarm is cancelled until the target leaves the detection area.
- LCA vehicle approach warning
Detection area:
A. When the vehicle speed is 0: 4 meters horizontally and 15 meters longitudinally;
B. When the vehicle speed is 18-60KM/hour: 4 meters horizontally and 15-20 meters longitudinally, increasing or decreasing with the speed;
C. When the vehicle speed is >60KM/hour: 4 meters horizontally and 20-30 meters longitudinally, increasing or decreasing with the speed.
- A0A overtaking early warning (detection area: 4 meters horizontally, 10 meters vertically)
Working logic: self-vehicle speed> 18KM/hour start
A0A overtaking warning mode:
A. When the vehicle actively surpasses other targets with a speed> 10KM/h and is in the detection area, a first-level alarm will be generated, and the alarm will be cancelled until the target leaves the detection area;
B. When the vehicle actively surpasses other targets with a speed> 10KM/hour and is in the alarm range and turns on the turn signal on the corresponding side, a secondary alarm is generated until the target leaves the detection area, and the alarm is cancelled.
-
RCT reversing warning (detection area: 5-15m fan-shaped area)
Working Logic: Start when R (reverse gear) is engaged
RCT Reversing Warning Mode:
When the target enters the detection area, a secondary alarm is generated, and the alarm is cancelled until the target leaves the detection area.
-
Power Cord Connection Method:
A. Connect or ground the black wire of the power cord to the negative pole of the car.
B. Connect the red wire of the power cord to the car's ACC power supply (normal power when the car starts/out of power when the car is turned off).
C. Connect the extension cord of the reminder light and the reminder light according to the left and right labels, and connect the male and female connectors.
- Connection method of power extension cord:
Wire the power extension cord from the front of the car to the rear of the car, insert the power cord at the front of the car, and insert the radar adapter cable at the rear of the car.
- Radar adapter cable connection party:
A. Plug in with the power extension cord.
B. One end of the short line is the left side, and the end of the long line is the right side.
C. The radar is plugged into the left and right radar plugs respectively.
D. Connect the yellow wire to the positive pole of the left turn signal of the car.
E. Connect the orange wire to the positive pole of the car's right turn signal.
F. Connect the white wire to the positive pole of the car's reversing light.
System Test
1. Start the car first during the test. At this time, the left and right warning lights are always on for a few seconds and then go out, indicating that the system circuit is connected normally; if the left and right warning lights are always on or off, it means that the radar head is connected abnormally.
2. After the car is started, pull up the handbrake, engage the reverse gear, release the foot brake (such as stepping on the clutch in manual gear), turn off all lights, and people move quickly from far to near behind the side of the car or shake with metal objects, correspondingly The side alarm indicator will flash and the buzzer will sound, indicating that the radar head is working normally and the horn is connected normally, otherwise check whether the connection is correct.
Package List
2 x Radar
2 x LED Reminder Light
1 x Buzzer
1 x Power Cord
1 x Power Extension Cord
2 x LED Reminder Light Extension Cable
1 x Radar Cable
2 x Bracket
2 x Manual
10 x Cable Tie
2 x Adhesion Promoter
16 x Screw
8 x Nut
1 x Accessory
