Specification:
Features:
- The front cover of instrument uses 316L stainless steel for long-term use, even on acid basis and wet environment.
- IP67 waterproof and dustproof design, longer service life.
- Stepper motors used for a full range of step meters, great feature with lower energy consumption, longer life, greater accuracy, etc.
- With ultra-wide operating voltage design (long-term operating voltage: 9-32V, maximum up to 36V).
- With the tight connection of the harness connector, the best and firm connection allows the meter to work even under strong vibrations.
- The products can be used for engines / generating units, boats, construction machinery, agricultural machinery, modification automotive,etc.
Specification:
Condition: 100% Brand New
Item Type: GPS Speedometer
Material:316L Stainless Steel + Fog Glass
Installation Diameter: Approx. 85mm / 3.3in
Indication Range: 0-999
Connection Method: Row Insertion
Operating Voltage: 9-32 VDC
Input Signal: GPS with antenna
Operating Current: 100mA
Operating Temperature: -30 - + 75
Storage Temperature: -40 - + 85
Degree of Protection: IP67
The Introduction Indicator Function: Speed Over Ground means speed over the group, COG means Direction of movement of the ground, ODO means total mileage, MPH means Mile, knots means mile of the sea, KM / H means KM, w: West, E: East, S: South, N: North
Press the black back button of the meter, you can select knots, mph km / h anyone you need to show and save automatically
Trip: Short mileage, the data will return to zero after switching off
ODO: Total mileage, data will be recorded after power off
Package List:
1 x Speedometer
1 x Antenna
1 x Manual
Note:
For this speedometer, we suggest buyers to connect the GPS antenna first and then connect the power, you cannot connect the power first and then connect the GPS antenna, otherwise it will be easy to damage the GPS mold.
Install Instruction:
- Open a hole in the panel (the cockpit board and the dashboard) with a diameter of 85mm, insert the meter into the hole, the panel corresponding to the instrument panel is marked with a convex table, and open a small notch in this location, to ensure that there is at least 85mm (3 3/8 inches) of the instrument panel on the back of the Instrument
- After mounting the instrument on the panel, screw with a fixed ring
- Connect the cable, the instrument housing is directly connected to the 12/24 v power supply
- Insert wire harness, firmly locked in the table
Features:
1The front cover of instrument uses 316L stainless steel for long-term use, even on acid basis and wet environment. 2IP67 waterproof and dustproof design, longer service life. 3Stepper motors used for a full range of step meters, great feature with lower energy consumption, longer life, greater accuracy, etc. 4With ultra-wide operating voltage design (long-term operating voltage: 9-32V, maximum up to 36V). 5With the tight connection of the harness connector, the best and firm connection allows the meter to work even under strong vibrations.
Package List: