Specification:
Condition: brand new
Item Type: Headlight
Power: 35W
Luminouns Flux: 3200lm-4800lm
Working Environment: -40-105C
Working Noise: 5DBA
Life Expectancy: 5,000 hours
Light Bulb Model: 9006
Color Temperature: 6000 K-pure white
Installation Steps:
- Turn off the power on both sides of the vehicle and wait for the lights and engine to cool down completely.
- Open the car engine hood and remove the left and right headlight bus. If there is enough installation space, you need not remove the headlights.
- Remove the vehicle side socket and the original headlight bulb.
- Remove the protective cover that is placed outside the HID bulb lamp, and put the HID bulb into the headlight. Do not shoehorn, rough shift.
- Connect the lamp bulb lead with the ballast to ensure a reliable connection.
- Connect the ballast power cord to the original lamp socket and check that the red and black wires are properly connected.
- Secure the safety device in the engine compartment with double-sided adhesive fixing screw light, and then secure the wire set with a cable tie.
- Turn on the power, test the light, turn off the power, straighten out the wires, and check again, then drive the headlights.
Features:
1The brightness is increased by 100%, which is higher, wider and farther. 2The service life of this product is the same as that of the car, giving you a good experience. 3Highly insulated wires and antielectromagnetic interference design offer you much security. 4Low power is needed, to reduce the burden on the vehicle's power system, which save at least 40% on power consumption. 5In the event of an accident, the sensing circuit in the high voltage package can immediately cut off the high voltage to protect the safety of personnel. 6Easy installation, just plug the Xenon lamp head into the original light source, fix the high voltage package, and connect the power cable. No need to change the original parts of the vehicle.
Package List:
2 x Headlight
2 x Ballast
2 x Patch
6 x Screw
6 x Nut
