Specification:
Item Type: BDM Frame Kit
Material: PMMA + PVC
Voltage: 12V
OBD Interface: Used for KTAG/K-TAG ECU chip adjustment interface
Scope of Application: Can be used for BDM100 programmer, for Fgtech, for CMD, for ETC, for Ktag Kess V2, etc.
For BDM 100:
- for BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows to read and program files in the ECU supplied with for MOTOROLA MPC5xx processor (essential).
The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board. This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions. The best tool for this is the BDM 100.
- Which way of programming is used, depends on manufacturer, model, year and the ECU type in the car.
Generally we use the easiest way of programming. So if a car can be programmed by the OBD port, we will do it this way.
- After the security entries for the OBD2 programming get more and more difficult, a new possibility has come up for chip tuning of ECUs with for Motorola MPC555 - 565.
- This generation of for Motorola processors contains 448KB - 1MB Flash memory. That memory cannot be read and programmed with an eprom programmer. Therefore it is possible over the so called BDM interface, which must be implemented on every ECU board. For that purpose there are mostly 10 solder pads on the PCB.
- Alternative there are ECUs with 12 or 14 solder pads, which can be supplied with operating voltage over these pads.
- The BDM100 connects these solder pads of the BDM port with the for Win OLS PC over the USB bus. The BDM100 gets its operating voltage from the USB bus. The ECU needs its own supply voltage of +12 volts.
- BDM100 requires the ECU to be open, "on the bench", as the reading/programming operations are
realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).
- BDM100 allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software).
Features:
1BDM frame with adapter, can be used for BDM100 programmer/Fgtech/CMD/ETC/Ktag Kess V2, etc. 2OBD interface, used for KTAG / KTAG ECU chip tuning interface, which has stable performance. 3Professional and complete BDM frame set, which can easily cope with more scenarios. 4BDM100 is a universal reader/programmer that allows to read and program files in the ECU supplied with for MOTOROLA MPC5xx processor (essential). 5Manufactured according to the original production specifications, in line with strict quality standards.
Package List:
4 x Frame Components
2 x Adjustment Screw
4 x Connector
1 x Circuit Board
40 x Probe (20ps/pack)
13 x Screw
2 x Frame Pillar
2 x Frame Position Adjustment Component