Specification:
Item Type: OBD2 Diagnostic Scanner
Material: ABS
Language: English Only
Size: Approx. 110 x 27 x 47mm/4.3 x 1.1 x 1.9in
Description:
- It covers almost for Opel all cars, even new cars with CAN-BUS based diagnostic, such as for Vectra-C, for Astra-H, for Zafira-B.
- The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
- The program supports many control units, like Engine, Automatic Transmission, ABS, air pocket, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
- Since for Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
- Fault codes will be shown with all available information
For Windows System: for Win XP/WIN 7 32bits ONLY (close anti-virus program)
Please do not update online, or device will damaged broken.
We have no test on win 7 or win 10,so we can not sure if software can compatible on those system or not.Please pay attention.
Full Fault Codes Text Description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like for Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or for Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
How to Use:
- Connect the OBD plug with the data cable
- Connect the car with OBD plug
- Finally use the other end of the data cable to connect to the computer and then use it
Features:
1PCbased special interface scanner, specially designed to fit for OPEL, which is a practical diagnostic tool. 2Firmware V1.95 software, greatly enhanced stability. Using PIC18F458 and FTDI chip, new for NEC relay. 3Wide application, it covers almost for Opel all cars, even new cars with CANBUS based diagnostic. 4The program allows you to read out and clear fault codes, show realtime data and perform output tests. 5The program supports many control units, such as engine, automatic transmission, ABS, engine cooling module, etc. 6The fault codes will show all available information. Only supports for Win XP /WIN 7 32 bit.
Package List:
1 x OBD2 Scanner
1 x CD
1 x Data Cable
