Specification:
Item Type: Dashboard Sensor Kit
Material: Plastic
Display: RPM, speed, oil pressure, oil temp, water temp, boost, air fuel ratio, EGT and voltage
Alarm Setting: SPEED, TACHO, WATERTEMP, OIL.TEMP, OIL PRESSURE, BOOST, VOLT
Speed Belt Display: 9000RPM Maximum
Display Type: Digital
Language: Chinese/English
Working Voltage: 9V-16V
Fitment: All 12V vehicles
Control Unit Current Consumption: <200MA (when IGN ON) <1MA (when IGN OFF) <5MA
Operating Temperature Range: -20 to +60 (humidity below 80%)
Storage Temperature Range: -30 to +80 (humidity below 80%)
Corresponding Speed Pulse: 2, 4, 6, 8 pulse
Pulse free: 1,274 - 16,562 pulses/KM (same as pulse 2 - 26)
Corresponding Cylinder Number: 1, 2, 3, 4, 5, 6, 8 (cycle)
Speed (SP): 0-255KM/H
Engine Speed: 0 - 9000RPM
Oil Pressure (OIL P.): 0-150PSI or 0-10BAR
Turbocharger (BOOST P.): -15-45PSI or -1-3BAR
Air Fuel Ratio (AFR): 20-10:1
Oil Temperature (OIL T.): 0-150 or 0-300
Water Temperature (WATER T.): 0-150 or 0-300
Exhaust Temperature (EXT T.): 0-1300 or 0-2400
Voltage: 9-16V
Clock: 24H clock
Frequently questions and answers:
- What kind of display screen does this use? Can the backlight color of the display be changed?
Answer: Use a low-power LCD display screen. can.
- Can the speed unit be changed? KPH, MPH?
Answer: Yes. The multi-function racing car modification table can switch between KPH (units per kilometer per hour) and MPH (units per mile per hour).
- Can the pressure unit be changed?
Answer: You can switch between BAR/PSI units in the multi-function racing car modification table.
- Can the temperature unit be changed? Celsius, Fahrenheit?
Answer: Yes. The multi-function racing car modification table can be switched between Fahrenheit () and Celsius () units.
- Can be used on motorcycles?
Answer: Suitable for all 12V vehicles, and has the function of life waterproof, which can be installed and used on motorcycles.
- Is this model equipped with all sensors? What is the sensor thread size? Can the sensor of the original car be connected?
Answer: We are equipped with oil temperature sensor, water temperature sensor, oil pressure sensor, turbocharger sensor and exhaust sensor sensor with uniform thread size ZG1/8. Therefore, the original car sensor cannot be connected, and the original car sensor needs to be replaced with our sensor. Otherwise, the thread does not match and cannot be installed.
- What should I do if my vehicle does not have an ECU?
Answer: Usually the signal needs to be connected to the sensor, and the speed and vehicle speed need to be connected to the ECU.
If the vehicle does not have an ECU, the speed can be connected to the negative electrode of the ignition coil. At this time, a speed adapter (sold separately) needs to be installed, otherwise it is easy to be interfered by the speed. Some customers want to connect the speed signal to the crankshaft sensor, we do not recommend installation. Because the pulse signal of the crankshaft sensor is much higher than the ECU output, the speed signal will be inaccurate.
Connect the Hall speed sensor to the vehicle speed, and then perform the vehicle speed calibration according to the instructions. The vehicle speed sensor can be installed on the front or rear wheels. Other signals are still connected to the sensor and will not be affected.
- How to receive the air-fuel ratio signal? There is no air-fuel ratio sensor inside.
Answer: The air-fuel ratio signal is directly connected to the narrow-area oxygen sensor (0-1V) of the original car, so we do not have another air-fuel ratio sensor.
- Why is the vehicle speed always showing 255 when I installed only?
Answer: The vehicle speed keeps showing 255, which is most likely caused by low-speed calibration. Please re-calibrate the vehicle speed according to the instructions. Vehicle speed calibration requires the vehicle to drive to 40KM/H, and then press the confirm key. If the vehicle speed is too low, the calibration will fail, and the vehicle speed will display 255.
- There are several spare sockets on the sensor converter. Can I use them to connect other data?
Answer: No. The spare socket on the sensor converter cannot be used for other purposes. This is because the converter molds of 904/907/908/909 models are the same. The free sockets are reserved for the combination tables of other models.
- Why can't I read the speed after installing the multifunctional conversion meter?
Answer: Usually the speed signal can be connected to the ECU. If the vehicle does not have an ECU, it can be connected to the ignition coil (you need to install a speed adapter at this time). If you cannot read the speed after installation normally, it is because the speed signal you grabbed is not accurate. As long as the correct speed signal is found and the instrument display failure is eliminated, the RPM can be read normally.
In addition, there are a small number of vehicles whose ECU speed output is a negative pulse, which requires an additional resistor to convert it into a positive pulse to be read normally.
Please check these reasons first. If you have any questions, you can consult our after-sales personnel.
- Does the installation support CAN and BUS vehicle protocols?
Answer: Not supported.
- After installation, the speed band fluctuates up and down, and then comes back to the highest point. What is the situation?
Answer: Usually our speed signal is recommended to connect to the ECU. This situation is usually because the signal caused by the connection of the ignition coil is interfered. You need to install a speed adapter, which needs to be connected to the vehicle line to eliminate signal interference.
- Does speed support GPS?
Answer: Not supported.
Features:
1Equipped with low consumption LCD screen and 8 LED lights with sequential indicator function. 2Advanced system with time clock function, and you can connect monitor and DPU through Bluetooth. 3Backlight dimmer adjusted automatically and manual, there are 7 color adjustable, 11 backlight modes optional. 4Intelligently display RPM, speed, oil pressure, oil temp, water temp, boost, air fuel ratio, EGT and voltage. 5Chinese/English language can be selected, suitable for all 12V vehicles to better meet your needs.
Package List:
1 x Display Monitor
1 x Converter
2 x Manual
4 x Screw Accessories
8 x Connecting Wire
2 x Power Cord
1 x Hose
1 x Bracket
7 x Sensor
2 x Connecting Wire
1 x Cover
1 x Connector
1 x Tee Connector
4 x Wire End
4 x Heat Shrinkable Tube
