Specification:
Item type: Fish Tank Heating Rod
Material: ABS+Quartz Glass Tube
Color: As Pictures Shown
Plug Model: EU Plug 220-240v
Size: Approx. 29x5.5x4cm/11.4x2.2x1.6in
Temperature Control Range: 20-34
How to Use:
- When the power is off, put the heating rod body into the water, and the whole body is completely immersed in the water, plug in the power supply, and set the temperature.
- Place the position, put the heating rod as far as possible in the position of water circulation, so that the heat of the heating element can circulate into the water in the tank.
- It is forbidden to insert the heating rod body into the sand or mud at the bottom of the cylinder to prevent unnecessary trouble caused by burning the rod body.
- Because the water-discharging and power-off induction device is located in the upper half of the heating rod, it is forbidden to install the rod body upside down, with the head down and the heating element up to avoid water shortage, the heating element will be exposed in the water, and the heating will cause damage.
- The temperature setting button in the middle of the power cord must be exposed out of the water, and be careful not to damage it due to water entering.
Features:
1Ni-Cr heating wire fast heat conduction, stable, energy saving, durable, not affected by magnetism. 2Automatic intelligent constant temperature. 20-34 cycle temperature control, convenient and quick. 3Using 23mm outer diameter thickened quartz tube, heating speed is faster, heat resistance, explosionproof more stable. 4Selected silicon carbide layer body, stable heat conduction. HD LED control display, real-time monitoring of the state of the fish tank. 5High safety factor, providing over-temperature alarm, low-temperature alarm, sensor failure display, and over-temperature protection.
Package List:
1 x Fish Tank Heating Rod
2 x Suction Cup
1 x Manual
