100% brand new quality products Package includes: hammer lighter1 (without gas) Tips: Due to air transportation regulations, butane gas cannot be boarded Color: red/black/yellow/blue (the color is shipped randomly) Size: 9040*10mm Material: zinc alloy + ABS Weight: about 36g How to operate the correct inflation 1. Before inflating, use a small tool to withstand the inflatable core, and completely release the residual gas inside to eliminate the pressure in the lighter's gas tank; 2. Press the outlet of the aerated gas tank vertically downwards for about 5 seconds each time, two or three times. 3. Please wait for about 3-5 minutes after the inflation is completed. If there is still no fire after 5 minutes, please adjust the valve to be larger. (Note + -) direction. For more details, please see the detailed introduction below. Special reminder: In plateau areas above 1000 meters above sea level, the use of inflatable windproof and direct lighter will affect the use. The ignition rate decreases in a large proportion. Please choose a windproof lighter carefully. Try to use open flames and kerosene lighters. 1. Detailed description of inflation: Aeration method 1. When refueling, there must be no sparks or fire around, and safety must be ensured. Do not add air while smoking; 2. Qualified butane gas should be used, inferior gas may damage the lighter or reduce the service life; 3. When refilling ordinary models, please stand upside down the lighter, align the gas bottle outlet at and cover the lighter inlet, press hard several times, and hold for about 2 seconds each time; if the gas cannot be refilled, it may be steam Excess air is left in the box. At this time, you can deflate. Use a small screwdriver to align the air inlet and quickly deflate for 1-2 times, and then perform the air filling operation; 4. When the loudspeaker is refilling, please use a flat-blade screwdriver and other tools to loosen the air inlet screw cover, and then follow the above steps. After refilling, the screw cover can be screwed flat, not too tight; otherwise, the cover will not be dense and the cover will not sound crisp, and the gas will escape. The hardcover type loudspeaker should use a special air nozzle to refuel; 5. When refueling the gasoline engine, you should open the head cover, pull out and invert the movement, open the outer sponge and add a proper amount of gasoline. After the gasoline penetrates into the inner sponge, cover it. The outer layer of sponge is then inserted into the casing; 6. After all kinds of lighters are refueled, wait at least 1 minute to adjust the temperature of the newly charged gas to room temperature, and wait for the residual gas attached to the lighter to evaporate before igniting. If the ignition operation is carried out immediately at this time, the residual gas on the surface of the lighter may be ignited, causing unnecessary danger. After refilling the gas, if the flame height is too high or too low during use, it is a normal phenomenon, and the flame height can be adjusted appropriately.