Features
1. High accuracy, it can measure up to 50g with a 0.001g accuracy resolution.
2. Can be used to measure the weight of medicine, jewelries, coins, etc.
3. LED high-definition display screen, whether day or night, can clearly read.
4. Compact size, lightweight and exquisite, you can put it in your pocket.
5. With the functions of tare, counting, unit conversion and on off button.
6. Made of high quality ABS and stainless steel material, which is hard to fade or deform.
7. You can install two AAA batteries(noy included), energy saving, environmental protection and durability, long standby time.
Specification
Condition: 100% Brand New
Item Type: Jewelry Scale
Material: ABS + Stainless Steel
Color: As shown in the picture
Size: Approx.14.5x7.7x5cm/5.7x3x2in
Weight: Approx.383g/13.5oz
Battery: 2 x AAA battery(Not included)
Key Description:
ON/OFF: ON/OFF key
PCS: Counting key
TARE: Tare key
MODE: Unit conversion key
- Turn on the power button ON / OFF and wait for three seconds to display 0 or 0.0 or 0.00 or 0.000.
- Place the desired scale on the weighing pan and read the value after the value is stable.
- Press the unit conversion key to change the weighing unit.
- Press the power button to turn off the computer when it is turned on.
Unit conversion key (MODE): Press this key to select the weight unit you need, there are a variety of units for conversion.
1ct / carat = 0.19997g 1oz / ounce = 28.3495g
1dwt = 1.5552g 1ozt / troy ounce = 31.1034g
1gn / grain = 0.0648g 1tl = 37.4999g
Tare / peel (TARE):
- Turn on the machine to 0.
- Place the deduction weight on the weighing pan.
- Press the tare key (TARE key or T key) to display 0.0 or 0.00, indicating that the weight has been deducted.
- Then put the item to be weighed, and the reading at this time is the net weight of the item.
Calibration: Calibration must have corresponding weight
Calibration mode:
- In shutdown mode, hold down the [TARE] or [T] key and then long press the [ON / OFF] key to boot for 2 seconds to enter the internal code test state, then press [MODE] or [UNIT] M key to enter calibration mode. "CAL" is displayed
- In weighing mode, long press MODE or UNIT or M key to enter calibration mode, at this time it displays CAL
Calibration Method:
After entering the calibration mode and displaying "CAL" in one of the above two modes, press the [MODE] or [UNIT] or [M] key again, the word "CAL" will be displayed, and it will flash a few times and display the calibration weight. Put the weight of the corresponding weight on the weighing pan, stabilize it for 3 ~ 4 seconds, and then complete the weight calibration. After displaying "PASS", press the [ON / OFF] key to shut down and complete the calibration.
Calibration method of electronic measuring spoon:
Calibration mode:
In the shutdown mode, press the TARE button to turn on the power, and then immediately release the other two buttons (MODE / HOLD button) after releasing. When a string of numbers is displayed. Then let go. Press the MODE button once.
1. Take 300g / 0.1g as an example (requires secondary correction) and then display 150g characters. Then put on a 150g weight. Wait for the number to display 300g. Then put on the 300g weight. After the screen displays PASS, long press the TARE key to shut down, and then take off the weight. Turn on the machine and put on the weight, check the accuracy of the calibration scale.
2. Take 500g / 0.1g as an example (requires secondary correction) and then display 200g characters. Then put on a 200g weight. The number will then display 500g. Then put on the 500g weight, after the screen shows PASS, long press the TARE key to shut down, and then remove the weight. Turn on the machine and put on the weight, check the accuracy of the calibration scale.
Counting Function (Limited to some products only):
In the normal weighing state, place a certain number of samples (the system presets 25, 50, 75, 100 sample numbers for selection) on the weighing pan, hold down the "PCS" key without letting go, 2 seconds After the clock, the display shows the number of samples, and then release the "PCS" key, press the "MODE" key (or "M" key, "UNITS" key) to switch the number of different samples, after selection, press the "PCS" key to confirm the sample The quantity is entered into the counting state; if you need to change the sample quantity, you can reset it according to the above steps; press the "MODE" key (or "M" key, "UNITS" key) in the counting state, the system will exit the counting state , Return to normal weighing status and display weight value.
Package List
1 x Jewelry Scale
1 x 50g Weight
1 x Measuring Spoon
1 x Tweezer
1 x Instruction Manual
