Features
1. With fan, the air volume is large, the performance is stable, and the air circulation of the whole machine is promoted.
2. The scientific and reasonable air duct circulation system makes the temperature and humidity inside the machine more uniform.
3. The roller eggs tray design is suitable for a variety of eggs, without changing the eggs tray, and can realize 360degree automatic eggs turning.
4. Using silicone heating wire, high temperature resistance, stable heating speed, continuous heating.
5. The shell is made of high-quality plastic material, which is wear-resistant and durable, and is not easily damaged.
Specification
Condition: 100% Brand New
Item Type: Incubator
Material: Plastic
Weight: Approx. 7100g/250.4oz
Product Size: Approx. 50 x 50 x 22cm/19.7 x 19.7 x 8.7in
Installation Steps:
Put the foam bottom shell, put the chassis, release the baby net, put the middle frame, the roller correspondingly, insert the eggs turning motor socket, put the cover, put the foam cover, plug in the test machine
Incubator Capacity:
Eggs: 70
Duck Eggs: About 50
Goose Eggs: About 35
Quail Eggs: 120-140
Temperature And Humidity Settings:
Under normal working conditions, short press the setting key, then press +/- to adjust to the desired temperature and then press the setting key, the temperature setting value is automatically saved at this time; the display interface jumps to the humidity setting, and continue to press +/- to adjust to the desired temperature. The humidity value is required.
Note: When setting, it must be a short press, not a long press. After pressing it, the display will flash the value. If there is no operation for a long time, the machine will automatically jumping to the normal display interface. If you need to continue to set and repeat the operation. When the machine is working normally, the displayed value is the real-time temperature and humidity in the machine. The flashing values during setting are the setting temperature and humidity. The displayed temperature will be different from the set temperature when it is just turned on, just wait for the machine to heat up normally. The default factory settings are temperature: 37.8 and humidity 60.
Manual Eggs Turning (Eggs Turning Detection)
Press the + key, the eggs turning indicator will light up, and observe whether the roller and the breeding eggs in the machine are turning. The default factory setting is: turn the eggs once every 120 minutes.
Eggs Lighting Function
Press the Eggs Lighting button and the eggs candling lamp will light up to observe the condition of the breeding eggs. It is recommended to use it at night, the observation will be clearer.
Alarm Function
The default alarm value is: 0.8set temperature0.8; 20RH%set humidity20RH%.
When the machine alarms, press the "-" key, the indicator light is on, and the alarm sound is eliminated. This operation is just to cancel the alarm sound. You need to check the cause of the alarm yourself and deal with it accordingly.
Note: After the machine is turned on, reaching the set temperature is the first cycle, and the system does not alarm by default.
Restore Factory
Press + and - together for more than 5 seconds to restore all parameters of the machine to the factory default values.
Test machine test
The line is connected, the power is turned on, and about 1 pot of water is added to the chassis from 1 water inlet, and the machine is tested for 2 hours. Press the + button to check whether the eggs turning is normal. The temperature is about 37.8 and the humidity is about 60. If the humidity is not enough, you can add a pot of water in the second water injection port to start the incubation (if the humidity is too high, no adjustment and operation are required. After the humidity is reduced, continue to add a small amount of water to maintain normal humidity).
Hatching Flowchart:
Incubation Periodlaying Eggs Lighting Eggs
Hatching Period Remove the Eggs to The Eggs Tray Lighting Eggs
Brooding Period Dewarming Feeding
Assembly Instructions:
Put the foam bottom shellput the chassisrelease the baby netput the middle frameinsert the roller correspondinglyinsert the eggs turning motor socketput the upper coverput the foam upper coverplug in the test machine
Package List
1 x Incubator
11 x Roller
1 x Plug
1 x Bottle Body
1 x Bottle Tip
