Features
1. Suitable for: Ph110 industrial PH meter is an intelligent upgrading product of industrial PH meter, which can continuously measure and control the PH value of sewage. This device is suitable for chemical industry, printing and dyeing, paper making, pharmaceutical, electroplating and environmental protection fields
2. Function: PH /ORP measurement, upper and lower limit control, current output, digital communication. PH high limit alarm, low limit alarm double relay, hysteresis can be adjusted freely
3. Meter Mode: Meter mode isolated transmitter port with a maximum loop resistance greater than 300. Audible alarm can be switch on or off through the interface options
4. LCD Backlight: LCD backlight can choose energy saving mode, automatic shutdown at regular time
5. Design: Password management function, prevent non professional misoperation
Specification
Item Type: ORP Water Quality Tester
Material: ABS
Measuring Range: PH(014 pH) ;ORP( -1900 - +1900 mV)
Accuracy: + 0.02 pH; + 1 mV
Resolution: 0.01pH; 1mV
Stability:0.02 pH/24 Hours;3 mV/24 Hours
PH Standard Solution: 4.00/6.86/9.18
Display Mode: 128x64 dot Array LCD
Temperature Compensation: 0100 C Manual/Auto (NTC10K)
Signal Output: 4-20mA Isolation Protection Output, Maximum Loop Resistance 300
Alarm Output: One Set of High and Low Limit Alarm Contacts (3A/250 V AC), Normally Open Contact Relay
Power Supply: AC 220V10% 50Hz
Power Consumption: 3W
Environmental Conditions: (1) Temperature 0-60 (2) Humidity85%RH
Boundary Dimension: Approx. 96 x 96 x 110mm / 3.8 x 3.8 x 4.3in (H x W x D)
Hole Size: Approx. 92 x 92mm / 3.6 x 3.6in (H x W)
Electrode Length: Approx. 5meters / 5.5yd
Weight: Approx. 730g / 26oz
Package List
1 x ORP Water Quality Tester
1 x Electrode
1 x User Manual
