Specification:
Item Type: Soda Maker
Material: Stainless Steel
Color: As shown in the picture
Size: Approx.13.5x26x43cm/5.3x10.2x16.9in
Weight: Approx.3218g/113.5oz
Water Bottle Capacity: 1000L
Cylinder: 0.6L
Instructions:
- Remove the back cover:
Hold the back cover with your right hand, press the anti-falling button with your index finger, and press it up first.
- Press the cylinder:
Hold the machine in your left hand, put the gas cylinder into the tank and tilt the machine head downward and rotate it clockwise.
- Install the back cover:
Hold the middle and lower end of the back cover, align the four screw card holders of the fuselage, and apply downward force.
- Fill the water bottle:
Place the water bottle into the body at the highest scale and screw it clockwise.
- Pump up:
Press down the gas injection button for 2-3 seconds, and stop when you hear the discharging sound of "poof".
- Unloading water bottle:
You can remove it when you hear a "click" sound in the machine head or a lot of bubbles appear in the bottle.
Features:
1Onekey convenient button, the top front is bubble water production button, and it will automatically discharge air after the production is completed. 2Buckle interface, easy loading and unloading, foodgrade nozzle, buckle design, use more assured, the buckle is tighter. 3Detachable water receiver box, easy to disassemble and install, easy to clean, prevent water pollution, and easy to clean in time. 4Back buckle, buttontype buckle, small and beautiful, prevent the back plate from slipping off, while reducing the gaps interval. 5The bottom design, easy to disassemble, the bottom concealed compartment can be equipped with gas cylinders, and the nonslip film reduces the body sliding during work.
Package List:
1 x Soda Maker
2 x Water Bottle
1 x Gasket
