Specification:
Item Type: Angle Grinder
Material: Aluminum Alloy
Weight: Approx. 1432g / 50.5oz
Sanding Wheel Diameter: 100mm / 4in
Hole Diameter: 16mm / 0.63in
Air Intake: 1/4
Intake Thread: G1/4
No-Load Speed: 11000rpm
Average Air Consumption: 60L/Min
Scope of Application: Home decoration, paint and wall treatment, etc.
How to Use:
- Perform a trial run for at least 30 seconds under no load, and use it after confirming that there is no abnormality
- The gas pipe must be placed at the back end during operation to prevent accidents
- Hold the machine firmly with both hands during work, and ensure stability
- If the gas stops suddenly during work, the switch must be set to the off state immediately
- During the grinding and polishing process, apply even force, and it is strictly forbidden to apply too much force or hit the object
- At the end of the work, turn off the switch first, and then put it down after the rotation is completely stopped, and the grinding disc is facing upwards
Features:
1Pneumatic angle grinder, made of lightweight aluminum alloy material, strong and durable. 2Multifunctional use, can be used for home decoration, paint and wall treatment, etc. 3The noload speed is about 11,000rpm, and the average air consumption is about 60L/min. 4Easy to operate, with locking switch, can prevent accidental start, safe and reliable. 5Equipped with highquality gear sets, low noise, strong power and high work efficiency.
Package List:
1 x Angle Grinder
1 x Handle
1 x Air Port
1 x Wrench
1 x Grinding Disc
1 x Manual
1 x Detachable Wrench
