Features:
100% brand new and high quality.
This wireless remote control switch is small enough to fit in a pocket or in a key fob.
Low current consumption.
This remote control switch board is ideal for universal reception of date and control signals.
This garage door remote can be used on garage doors, rolling doors or windows, remote door locks, etc.
Wonderful wireless remote control switch for home appliances.
Take the remote control, you can easily control all electrical appliances at home, and the remote control is easy to install and convenient to use.
The wireless remote control switch board and remote control are of high quality and can last for a long time.
Specifications:
Remote control:
Working voltage: DC 12V (not including battery)
Working current: 30mA
Frequency: 315MHz
Encoding type: fixed code, learning code
Range: kilometers
Encoding short-circuit key blocking pad 2-8 keys
Impact resistance: 3.3m-4.7m
Control switch system:
Working voltage: DC 12V
Working frequency: 315MHz
Receiving sensitivity: -90dBm
Maximum load: 5A
Encoding type: learning code
Working mode: jog, lock room, self-locking (can be changed arbitrarily)
Study method:
When you hear the sound, press the learning button on the receiving board: "BI". It means to enter the learning state, and then press the button on the remote control relative. When you hear voice 3 "BIBIBI", it means successful learning.
Answer: Signal is not locked (JOG): Press button NO.1 on the remote control to learn
B: Signal self-locking: (self-locking): Press menu No. 3 to operate and learn, each channel is independent of other
C: Signal interlock: press the button NO.2 to learn
D: 1 way, 4 way is jogging, 5CH-8CH is self-locking, press the NO.4button to learn
E: No. 1, No. 4 is for jogging, 5CH-8CH is lock room, press NO.5button to learn
F: No. 1, No. 4 is locked room, 5CH-8CH is self-locking, press button NO.6 to learn
Clearing method: press the learn button for about 10 seconds, when you hear "BI", it means successful clearing
With cover, dust-proof, moisture-proof, safe receiver.
Wiring instructions:
- +V: Connect to the positive pole of the 12V power supply;
- GND: connect to the negative pole of the 12V power supply;
- NO: output terminal; normally open terminal of the relay;
- COM: output terminal; relay common terminal;
- NC: output terminal; normally closed terminal of the relay;
Learn to code:
- Press the code matching button on the control panel once, the LED indicator flashes, press the remote control button that needs to be coded, the control panel LED indicator. Flashing 3 times in succession, the learning and code matching is successful.
Clear data:
Press the learning button on the control panel without letting go. After the LED indicator flashes 5 times, it will automatically clear all the remote controllers that have learned the code.
After clearing, the remote control that has previously learned to code will no longer be controlled.
Working mode description:
- Set to jog output: unplug the jumper cap on the board and don't use it.
- Set to self-locking output: short-circuit the "1-2" pins with the jumper cap on the board.
- Set to interlock output: short-circuit the "3-4" pins with the jumper cap on the board.
Explanation of output mode:
- Self-locking: Press the same remote control button, press it once, the relay is turned on, and press it again, the relay is turned off.
- Interlock: Press the "A" button on the remote control to turn on the relay, and press the "B" button on the remote control to turn off the relay.
- Jog: Press the "A" button on the remote control to turn on the relay, and release the "A" button on the remote control to turn off the relay. If you keep pressing the remote control
If the "A" key is not released, the relay will always be on. When you release the remote control, the relay will be off.
Precautions:
- Do not operate with electricity, turn off the power supply for operation, and turn it on after the test is confirmed to be correct.
- When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally be shorter).
- When using wireless electronic products, pay attention to avoiding metal masks, large electronic equipment, electromagnetic fields and other strong sources of interference to avoid short distances between the remote control and the receiving unit or failing to work normally.
- Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.
Packing list:
1 x Remote control (not including battery)
1 x Receiver (with box)
