Feature:
- High-quality brass material to prevent air leakage, good sealing and anti-corrosion, durable in use.
- Adjustment screw rod, turn the adjusting screw clockwise after installation, you can adjust the input pressure 0.4MPA-4MPA.
- The two pressure gauge dials are covered with anti-skid plastic protective film, the scale is clearly visible and does not fade.
- Low-pressure gauge, dial diameter is 72MM, rated input pressure is 0.4MPA-4MPA, pressure reaches 4x1.3=5.2MPA.
- High-pressure gauge, dial diameter is 72MM, rated input pressure is 1MPA-15MPA, the input pressure is prohibited to exceed the rated input pressure.
Specification:
Condition: 100% Brand New
Item Type: Nitrogen Regulator
Material: Brass
Use Medium: Nitrogen
Maximum Inlet Pressure: 15MPa
Maximum Outlet Pressure: 4MPa
Flow Rate: 16Nm??/h
Adjustment Screw Rod: After installation, turn the adjustment screw clockwise to adjust the input pressure 0.4MPA-4MPA
Input Filter: Filter protects the pressure reducer
Input Interface: Outer diameter 8mm/0.3in, 10mm/0.4in output end, double sealing and leakproof setting
Dial Diamter: Approx. 72mm / 2.8in
Weight: Approx. 1728g / 61oz
Package List:
1 x Nitrogen Regulator
1 x Adjustment Screw Rod
Note:
- When installing the pressure reducing valve, you should check that the specifications of the gas cylinder connection are the same, and open the gas cylinder instantly, and then connect the pressure reducer after blowing out the garbage, so as to prevent impurities from entering the pressure reducer.
- When opening the safety valve, avoid standing on the front of the pressure reducer and the outlet, and open slowly to avoid accidents.
