Features:
-
This is a universal rotating encoder with a diameter of 40mm.
-
It uses the corresponding power supply voltage DC5~24V (collector open output type).
-
The position of the Z phase can be easily adjusted using the origin indication function.
-
It can achieve axial load, radial shaft load 30N, thrust shaft load 20N.
-
With reverse connection, load short circuit protected circuit, improved reliability (also equipped with linear output driver)
Specification:
Condition: 100% Brand New
Model: E6B2-CWZ6C
Application: Automatic Control
Read Mode: Contact type
Working Principle: incremental
Supply Voltage: DC 5 V -5% to DC 24 V + 15%
Ripple (p-p): up to 5%.
Current Consumption (* 1): Maximum 70mA.
Resolution (pulse / rotation): 1000
Output Stage: Stages A, B and Z.
Phase Difference Between Outputs: 9045between A and B (1/4T1/8 T)
Output Configuration: NPN open collector output
Output Capacity: Applied voltage: 30 VDC maximum; Sink current: 35 mA maximum; Residual voltage: 0.4 V maximum (absorption current is 35 mA)
Maximum Response frequency (* 3): 100kHz
Output Rise and Fall Times: up to 1s. (Control output voltage: 5 V, load resistance: 1 k, cable length: 2 m maximum)
Starting the moment of force: max. 0.9 mN.m.
Inertia Moment: maximum 1x10-6kg.m2; (maximum 3x10-7kg.m2, maximum 600 P/R)
Radial Shaft Load: 30N
Thrust Shaft Load: 20N
Maximum Allowable speed: 6,000r / min
Protected Circuit: power reverse polarity protected, load short circuit protected
Ambient Temperature Range: Operating temperature: -10 to 70(no icing); Storage: -25 to 85 (no icing)
Operating / Storage Environment Humidity Range: 35% to 85% (no condensation)
Insulation Resistance: minimum 20M. (at 500 VDC) between the current-carrying component and the housing
Dielectric Strength: 500 VAC, 50/60 Hz, 1 minute between current-carrying part and outer casing
Vibration Resistance (destruction): 10 to 500 Hz, 150 m / s2 or 2 mm double amplitude, 11 minutes, 3 times in X, Y and Z directions
Impact Resistance (destruction): 1,000m / s23 times in the X, Y and Z directions
Protected Level: IEC standard IP50
Connection Method: IEC standard IP64 (JED standard IP64f resistant to drip, oil)
Material: Case: ABS; Main unit: Aluminum; Shaft: SUS420J2
Weight: Approx. 184g / 6.5oz
Package List:
1 * Encoder
3 * Screw
1 * User Manual
