Features:
- Suitable for many household sewing machines that use high-shank pressers.
- Can meet your different sewing needs, easy to replace and operate.
- Made of high quality material,the product is durable,with long service life.
- Various type are available,these product can meets your different needs.
- A kit contains 25 pieces stuff,very practical and economical.
Specification:
Material:iron
Quantity: 25 pieces
High handle presser height: approx. 32 mm/1.3 in
Package List:
25Presser Foot
2Screw
Note:
Not suitable for low-handle household sewing machines.Not suitable for your machine's Zig-Zag settings, they only apply to Straight Stitch.
Hinged Lift for Open Line-Right (Edge Feet)
P813/ 12463H-3/16 "Right hinged lifting foot for open line. also known as" ". Applicable to long and fast, very uniform open line, firm bottom. 12463RH-3/16")
P814/ 12463H-1/4 "Right hinged lifting foot for open wire. also known as" ". It is very suitable for long and fast, very uniform open-wire cutting, strong bottom. 12463RH-1/4")
P811/ 12463H-1/16 "Right hinged lifting foot for open wire. also known as" ". It is very suitable for long, fast, very uniform open line, firm bottom. 12463RH-1/16")
P812/ 12463H-1/8 "Right hinged lifting foot for open line. also known as" ". It is very suitable for long, fast, very uniform open line, firm bottom. 12463RH-1/8")
Compensation Topsetch Feet-pair
CR-1/ 32N compensation flat seam foot (right) provides you with a uniform flat seam distance fabric edge 1/32 ". Narrow-width feet. CR 1/32" N)
CR-1/16 compensation flat seam foot (right) provides you with a uniform flat seam distance fabric edge 1/16 ". Routine width feet. CR 1/16" E)
CR-3/16 compensated flat feet (right) provide you with a uniform flat seam from the edge of the fabric 3/16 inches.A conventional width rule.CR 3/16"E
CR-1/4 compensatory Topsetch Foot (right) provides you with a uniform flat stitch at the edge of the fabric 1/4 ". A conventional width rule. CR 1/4" E)
PTFE foot
T35/24983 T, the same as the 24983 standard double toe press foot, but it has a sturdy PTFE bottom that makes it very smooth.Suitable for sticky fabrics or materials.
T363/ MT3 PTFE foot, same as 40322SH standard zipper foot, with solid PTFE bottom.(40322 SHT) (T363)
T350/ MT9 PTFE feet.Similar to the 24983 T, the difference is that it has a flat, smooth bottom sole with a puncture.Suitable for sticky fabrics or materials.(T35 single puncture)
Fold foot
S952 can adjust the combination of stitches or shrinkage feet.After the rear screw is fully turned, the feet are sewn like regular sewing or stitching feet.As you turn the screw inward, your feet start to relax.Continue to rotate the screw clockwise in order to draw more pleats.
P50H/ 120828H high fold foot.The most popular fold foot, with a high stage, can add light to medium fabric creases.Put your fingers behind your feet to prevent easy eating and minimize it.P50
Scroll Hemmer Feet
160344 Scroll Hemmer foot creates a beautiful double 1/16 ". 1 1.6 mm 1/16" on light to medium fabric)
120803 Scroll Hemmer foot creates a beautiful double fold 1/8 ". 2-1/2 3.2 mm 1/8" on light to medium fabric)
120806 Scroll Hemmer foot creates a beautiful double fold 1/4 ". (61/4)" on light to medium fabric)
Cording feet
P69HR-3/16 hinged pin (right).This foot will be 3/16 "The diameter of the pipe is connected to your fabric. R36069H-3/16")
P69HR-1/4 hinged pin (right).This foot will be 1/4 "The diameter of the pipe is connected to your fabric. P69RH-1/4")
P69HL-1/4 hinged pin (left).This foot will be 1/4 "The diameter of the pipe is connected to your fabric. P69LH-1/4")
P36LN narrow hinged foot (left).(12435 HLN)
P36N narrow hinged foot (right).(12435 HN)
Miscellaneous feet
P363 narrow open hinge zipper foot.40322SH
P58N narrow hinge foot.142058N
P35/24983 conventional hinged foot.
The P351 standard two-toe foot set is installed on most single-needle machines in the factory.
