Features:
- Adopt patch photocoupler isolation, strong driving ability, stable performance. Trigger current is 5mA.
- Module operating voltage is 5V,12V,24V for choice.
- Each path of the module can be triggered by the high level or low level through a jumper setting.
- Fault-tolerant design,even if the control line breaks,the relay will not move.
- Power indicator light (green), 8-way relay state indicator light (red).
- Humanized interface design, all interfaces can be directly connected through the terminal lead.
- Four fixing bolt holes are provided.
Specification:
Weight: 118g/4.2oz
Common interface load: AC 250V/10A, DC 30V/10A
Module Size (LWH): 141.55018.5mm/5.620.7inch
Bolt Hole: 3.1 mm; 136*44.5mm (spacing)
Voltage: 5V, 12V, 24V (Optional)
Module interface:
- DC+ : connect to the positive pole of the power supply (5V.9V.
- DC- : connect to the power negative pole
- In1-in8: according to the setting of each circuit, the corresponding relay can be controlled with high or low level to suck in
Relay output terminal: there are 24 wire interfaces, all interfaces can be directly connected to lead, convenient for users to use
1. NO1--NO8: the relay normally opens the interface, and the relay is suspended before it is sucked in, and then it is connected with COM short after it is sucked in;
2. COM1--COM8: relay common interface;
3. NC1--NC8: relay normally closed interface. The relay is short connected with COM before it is sucked in and suspended after it is sucked in.
High and low level trigger selection terminal:
- S1-S8 is the high-low level trigger selection of relay 1-8 channels successively;
- Com and low short connection, the corresponding relay for low level trigger, com and high short connection for high level trigger.
Package List:
1 x Relay Module