Description:
1, the original chip CP2102, generate COM port after installing the driver.
2, input MICRO MINI-USB cable connected to the computer USB interface, with 3.3V and 5V two power output
4, on-board status indicators, receiving indicator properly installed drive status indicator remains, send and receive indicator flashes when the communication with run LED indicator.
5, supports baud rates from 300bps ~ 1Mbps between
6, the communication format support: 1) data bits 5,6,7,8; 2) support 1.5, 2 stop bits; 3) odd, even, mark, space, none parity
7, supported operating systems: windows 8.1 / 7 / vista / xp / 98, OS-X / OS-9, Linux
8, USB seat MICRO MINI-USB interface Block
9, chip components for the regular company of welding, stable quality, beautiful appearance
10 with DTR trigger signal output can be directly mini ATMEGA328P
Features:
- Embedded USB transceiver, no external circuit device
- Containing clock circuit, no external circuit device
- Contains power-on reset circuit
- The on-chip voltage regulator within the 3.3V output
- Meet the USB2.0 specification requirements
- SUSPEND pins support USB suspend state
- asynchronous serial data bus compatible with all handshakes and modulation controller interface signals
- Support data format is 8 data bits, 1 stop bit and the parity bit
- connotation 512 byte receive buffer and 512 byte transmit buffer
- Supports hardware or X-ON / X-OFF Handshake
Specification:
Model: CP2102
Port: MICRO MINI-USB Port
Baud rate: 300bps~1Mbps
Size: 1620mm/0.60.8in
Weight: Approx.3g/0.1oz
Package list:
1 x USB to UART TTL Module
1 x pin
