Features
1. Using standard ModbusRTU protocol, it can be directly adapted to PLC, DCS and various domestic configuration software.
2. RS485 communication signal output interface adopts double protection of overvoltage and overcurrent.
3. Input signal type and communication format can be set by the host computer software, and the power polarity is protected against reverse connection.
4. 4channel analog converter, can input 2 channels 020mA, 420mA, 2 channels 05V, 010V four kinds of analog input signals, input analog signal data, and output through isolated RS485 interface.
5. Signal input and the RS485 communication electrical signal are isolated from each other, effectively suppressing various serial mode and common mode interference, ensuring the accuracy of the data, and also ensuring the reliable operation of the module.
Specification
Item Type: Data Acquisition Module
Material: Resin
Model: WDAM485
Electrical Parameters:
Signal Input 1. Input Signal: 4 Analog Inputs
2. Input Signal Type: 0-20mA, 4-20mA, 0-5V, 0-10V Four Analog Signals
3. Sampling Rate: 4 Channels Are Collected Once Every 1mS
4. Resolution: 12-Bit AD
5. Accuracy: Voltage 0.5%, Current 0.5%
6. Isolation Voltage Protection: 1500V
RS485Communication Output 1. Communication Protocol: MODBUS-RTU
2. Interface Type: Isolated RS485 Communication, the Output Interface Adopts Double Protection of Overvoltage and Overcurrent
3. Baud Rate: 4800, 9600, 19200, 38400, 57600 the Default Is 9600
4. Check Digit: No Check
5. Setting Method: Module Address Can Be Set by Software
6. Isolated Voltage Protection: 1500V
Module SizeApprox. 88 x 55 x 44mm / 3.5 x 2.2 x 1.7in
Installation Method 35 Standard Card Rail Type
Working Environment Temperature: -10+55
Humidity: 35-85% (Non-Condensing)
Power Supply 1. Power Supply: 10v-30v Wide Range Power Supply, Power Supply Anti-Reverse Protection
2. Power Consumption: Less than 1W
Purpose: Convert Analog Quantity to Digital Quantity
Package List
1 x Converter
