Specification:
Item Type: Portapack H2
Material: ABS+LCD
Purpose: Radio Transceiver
Colour: White
Antenna Receiving Frequency Range: 1MHz-6GHz
Capture Replay:
One of the best things about PortaPack is that can easily capture and replay the wireless signal from the ISM band remote control.
Create a catch. You only need to enter the "Catching" menu, set the frequency of the remote control key, press the red "R" recording button, and then press the key on the remote control.
Then stop recording to save to the storage card.
Now you can enter the replay menu, select the file you just recorded and click play. The exact same signal will be transmitted through the air, effectively replacing your remote control key.
TX Microphone:
Receiver:
By connecting speakers to Portapacks 3.5mm audio jack, you can easily listen to standard NFM and WFM audio signals.
You can easily enable ADS-B reception on PortaPack by selecting the inductor and lightning symbol in the upper right corner.
Hardware Configuration:
-
2in TFT 240 x 320 Screen
Navigation Switch
Audio Output
Microphone Input
DC 2.1 Interface
4 Layers of Gold Plating
HAVOC Features Include:
IQ File Playback
Microphone FM Transmission with CTCSS
CTCSS Decoder
Frequency Manager (Save and load from storage card, with categories and comments)
File Manager
"Soundboard" wave file player (place 8 bit mono files) storage card wav directory)
ADS-B Receiver with Map View
SSTV Transmitter
Fully Configurable Transmit Signal
POCSAG Transmitter
POCSAG Receiver Decoder
Morse Transmitter (FM Tones and CW)
OOK transmitter for common remote encoders (PT2262, Doorbell, Remote Socket, Some Garages)
RDS (Radio Data System) PSN, RadioText and Time Group Transmitter
Weather Radiosonde Receiver for M10 and M2K2...
AFSK Receiver
AFSK Transmitter (Bell202...)
Nuoptix DTMF Synchronization Transmitter
Universal Remote Control for TouchTunes Jukebox
LCR (Language de Commande Routier) Message Generator
Street Lighting Control Transmitter (CCIR Tones)
"Play Dead" in an emergency
Fully Configurable RF Signal Generator
RSSI audio output as pitch (For irection finding)
Features:
-
2in, 240 x 320 RGB LCD with Resistive Touch Screen.
4 Way Arrows Key, Rotating Jog Dial and Selection Button.
Button battery for saving settings and date time.
Miniature storage card slot for data and codes storage
Function:
SSB, AM, Narrowband FM, Wideband FM Audio Reception, with Spectrum Waterfall.
Wideband (18MHz) Spectrum Analysis and Waterfall Chart.
Monitoring of Ships (AIS), Automobiles (TPMS) and Utility Instrument Transponders (ITRON ERT).
PM calibration can achieve more accurate tuning.
Sleep mode saves power by only turning off the display.
Illustrate:
Then PortaPack should be suitable. Compatibility with Blue is experimental. A Blue owner reported good results, but there was little mechanical interference
Between PortaPack audio capacitor and baseband connector.
PortaPack requires an external battery. Any USB connected battery should work, although their quality varies greatly, and a poorly designed battery may inject regulator noise into the radio.
The receiving sensitivity varies by frequency band, but the performance is not as good as a real amateur radio receiver.
Features:
1Voice Activated Walkie Talkie Radio: Using a 3.5mm audio jack, the transmitter can also be used as a standard push to talk or voice activated walkie talkie radio. 2Press the Call: Plug the microphone into the audio jack, just press and hold the button on the right, the sender can press the call. 3NFM WFM Audio Signals: You can easily listen to standard NFM and WFM audio signals by connecting the speaker to the 3.5mm audio jack of the transmitter. 4Capture Wireless Signal: This transmitter can easily capture and replay the wireless signal from the ISM band remote control. 5Basic Specifications: This is a HRP01 full featured radio transceiver with a 3.2in TFT 240 x 320 screen.
Package List:
1 x Full Featured Radio Transceiver(Shipped with battery)
1 x Antenna
1 x USB Data Cable
1 x English User Manual
