Specification:
Item Type:Humidity Controller
Technical Data: 4% Relative Humidity ( 3% Tolerance)
Allowable Air Flow Rate: 15m/Sec
Contact Type: Conversion Contact
Contact Resistance: < 10mOhm
Service Life : >100 000 Cycles
Exchange Capacity: 20VAC/DC100mA
DC 20WDDC 20W
Electro Magnetic Compatibility: EN 61000-3-2, EN 61000-3-3 55014-1-2
Connection: 1.5mm 2 - 3-pole terminal 2.5mm, clamping torsion 0.5Nm highest: rigid wire 2.5mm, steel strand (end ferrule with wire) 1.5mm
Installation: 35mm DIN rail, EN50022
Housing: Plastic according to UL94 V - 0, light gray
Size:67 x 50 x 38mm / 2.64 x 1.97 x 1.5in
Weight: 60 g / 2.12 oz(approx.)
Operating/Storage Temperature: 0 To +60C (+32 To +140F) / -20 To +80C (-4 To +176F)
Protection Type : IP20
Approval: CE
- At 50% Relative Humidity
Features:
123 pole terminal 2.5mm wire, 1 is the fire line input line, 2 is the neutral line output line, supports 12 wide voltage input. 2Back rail slot for easy attachment to 35mm rails. 3PC material case has highquality heat resistance, high impact resistance and other physical and mechanical properties. 4Excellent electrical insulation, elongation, dimensional stability and chemical resistance. High strength. 5The purpose of the mechanical humidity controller MFR012 is to control the electric heating so that the dew point raises the relative humidity by more than 65% at a crucial time. In this way, condensation and corrosion are effectively prevented.
Package List:
1 x Humidity Controller
