Specification:
Features:
This is a normally open proximity switch sensor with 8mm detection distance.
When proximity switch is close to some target object, it will send out control signal.
It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching.
High sensitivity, quick response, stable performance.
Non-contact detection avoids the sensor and the target object from damages.
Specification:
Model: LJ18A3-8-Z/BX
Detection distance: 8mm10%
Setting distance: 0-7mm
Delay distance: <10% of detection distance
Detection object: Magnetic metal(The detection distance decreases when it is non-magnetic metal)
Standard detection object: Iron 30301mm
Response frequency: 0.5kHz
Supply voltage: DC12-24V (6-36V) impulse (P-P) below 10%
Withstand voltage: AC1000V 50/60Hz 1min
Current consumption: N.P type: <13mA, D type: <0.8mA, A type: <1.7mA
Control output: N.P type: <300mA, D type: <200mA, A type: <400mA
Loop protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection, type A: surge absorption
Ambient temperature and humidity: -30~65, 35-95%RH
Temperature influence: Temperature range -30~65, at 23, 15% detection distance; Temperature range -25~60, at 23, 10% 0detection distance
Insulation impedance: >50M
Housing material: Nickel plated brass
Detection surface: ABS
Weight: Approx. 80g/2.8oz
Package list:
1 * Inductive Proximity Switch
Features:
1This is a normally open proximity switch sensor with 8mm detection distance. 2When proximity switch is close to some target object, it will send out control signal.3It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching.4High sensitivity, quick response, stable performance. 5Non-contact detection avoids the sensor and the target object from damages.
Package List:
