Specification:
Item Type: Thermoelectric Cooler Module
Model: TEC1-12705
Material: Ceramic + semiconductor
Purpose: Cooling
Wire Specification: Wire Length: Approx. 100mm / 3.9in 5mm, RV standard wire, single head approx. 5mm / 0.2in with tin plated
Internal Resistance: 2.4~2.7 (ambient temperature 231, 1kHZ Ac test)
Dimension: Approx. 40 x 40 x 3.6mm / 1.6 x 1.6 x 0.1in
Maximum Temperature Difference: Tmaximum(Qc=0)>61
Cooling Power: Qcmaximum 45W
Assembly Pressure: 85N/cm
Working Environment: Temperature range -6567 (too high ambient temperature will directly affect the cooling efficiency)
Ambient Temperature: -1040
How to Use:
- The working state of the refrigeration sheet is that one side is cooling and the other is heating.
- To the left of the red line, the upper side is the hot side, and the lower side is the cold side.
Features:
1A solid piece without vibration, noise, possess long life and easy installation. Can work continuously does not need any refrigerant, there is no pollution source or rotating parts, no rotation effect, no sliding part 2Semiconductor refrigeration film have two functions, both cooling and heating 3The product is a currenttransducer type chip. Highaccuracy temperature control can be realized through the control of the input current. Coupled with temperature detection and control means, it is easy to realize remote control, program control, and computer control to form an automatic control system 4The thermal inertia is very small, and the cooling and heating time is very fast, the cooling fin will reach the maximum temperature difference in less than one minute when the hot end has good heat dissipation and the cold end is empty 5Reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are usually suitable for power generation in the middle and low temperature areas
Package List:
1 x Thermoelectric Cooler Module
