Specification:
Item Type: Fan Temperature Control Governor
Material: PCB
Basic Parameters:
Working Current: <0.1A
Fan Current: <5A (the on board connector can withstand capacity, if you need to control higher power, you only need to run the power line separately)
PWM Range: 5-100 or 0 (% plus or minus 0.3%)
PWM Frequency: 20KHz or 2.5KHz (2%)
PWM Signal Amplitude: 10.5V (no load)
Temperature Measurement Range: -9.9-99.9
Temperature Measurement Error: The error in the range of 0-50 is lower than 1.2, and the error in other ranges is lower than 2
Features:
1FOR EBM FOUR WIRE FANS: Four wire PWM fan temperature controller with control signal of 10V support common for EBM four wire fans 24 WIRE CONTROL HIGH VOLTAGE EC FAN: Fan temperature control governor support conventional high voltage EC fan four wire control, with 10V PWM signal 3LOW TEMPERATURE POWER SHUTDOWN: Support low temperature shutdown fan, PWM shutdown or extended relay to shutdown fan power, easy to operate 4DC1155V VOLTAGE, 2.5KHZ AND 20KHZ FREQUENCY: Wide voltage working from DC1155V, support 2.5KHZ and 20KHZ frequency setting, support reverse sequence fan 59.999.9 MEASUREMENT WITH SMALL ERROR: The temperature measurement range is 9.999.9, with low temperature measurement error. The error in the range of 050 is less than 1.2, and the error in other ranges is less than 2
Package List:
1 x Fan Temperature Control Governor
1 x Cable
