Features
1. The shell made of quality glass material, smooth surface, comfortable to touch.
2. With indicator light, it will light on while touching, it means the touch is valid, otherwise it is not touched right.
3. Smart light switch, it can dimming and color change, multi mode to be adjusted.
4. 2 different color for you to choose, meet your different needs.
5. Wonderful smart switch for light control.
Specification
Features:
- The shell made of quality glass material, smooth surface, comfortable to touch.
- With indicator light, it will light on while touching, it means the touch is valid, otherwise it is not touched right.
- Smart light switch, it can dimming and color change, multi mode to be adjusted.
- 2 different color for you to choose, meet your different needs.
- Wonderful smart switch for light control.
Specifications:
Item type: light switch
Shell Material: glass
Weight: Approx. 170g
Optional Color: black, white
Size(length x widthx height): Approx. 86x86x34mm/3.4x3.4x1.3in
Input voltage 12-24 (V)
Color rendering index: RGB&W
Luminous flux 70 (LM)
Shell material glass
Power supply voltage: 12-24V
Color temperature RGB
Installation method: Embedded
Control method: touch
Connection method: Embedded
Control range: multi-color
Three outputs, each with an output current of 4A and a total load current of 12A.
Maximum power output: 144W(input voltage 12V) 288W(input voltage 24V)
Connection mode: common anode
Static power consumption: <1W
The button functions are as follows:
Switch button, turn the controller output on or off.
Mode button, select the next mode.
Speed button, the speed is faster, the speed has 10 mode. Increase brightness, adjustable brightness is 15
Speed button, the speed is slow, and the speed has 10 mode. Increase brightness, adjustable brightness is 15
Static red
Static green
Static blue
Static white
Color circle. Select the desired color on the circle.
Adjustable light modes:
ModesModes
colours gradient Adjustable speed Static red Adjustable brightness
colours dark to bright Static green
RGB gradient Static blue
RGB dark to bright Static yellow
colours jump change Static purple
RGBjump change Static cyan
Static white
Packing List:
1 x Light switch
1 x Instruction
Note:
- Connect the load line at first, then connect the power line; make sure there is no short circuit between the input and output cables before powering on.
- The controller supply voltage range is DC12 ~ 24V, beyond the voltage range may burn out the controller.
- Touched by hand, when the indicator light is on, it means the touch is valid, otherwise it is not touched right.
- After the line is connected, under normal circumstances, the indicator light next to the terminal is always bright, otherwise there is a problem with the wiring.
Package List