Specification:
Features:
The valve body is designed by pneumatic DC channel, with large size of inlet and outlet and sufficient flow.
The integral float ball anti-blowing design prevents the high-speed air from blowing up the float ball prematurely and closes the exhaust port.
Good sealing performance, effective leakage prevention, stable performance, long-term use.
Made of selected high quality materials, it has excellent quality and good durability.
Installation method is simple, is the perfect irrigation accessories, mostly used in gardening and horticulture planting.
Specification:
Condition: 100% Brand New
Item Type: Irrigation Air Valve
Material: Plastic
Connection Form: Thread
Male Thread: G3/4in
Structure: Floating Ball Valve
Nominal Diameter: 20mm
Pressure Environment: Less Than 10kg
Working Temperature: Normal Temperature
Standard: Chinese Standard
Flow Direction: One Direction
Drive Mode: Hydraulic Control
Uses: Pressure Reducing Valve
Type (Channel Position): Straight-Through
Target Object: Water
Working Pressure: 0.2-1.6Mpa
Application: Agricultural Sprinkler Irrigation
Weight: Approx. 201g / 7.1oz
Size: Approx. 11x7cm / 4.3x2.8in
Package List:
1 x Irrigation Air Valve
Working principle:
When the gas enters the exhaust valve chamber and gathers in the upper part of the exhaust valve, with the increase of the gas in the valve, the pressure rises. When the gas pressure is greater than the system pressure, the water level in the chamber will drop, and the buoy will drop with the water level and open the exhaust port. After the exhaust gas is exhausted, the water level will rise, and the buoy will also rise, closing the exhaust port. When the negative pressure is generated in the system, the water level in the valve chamber drops and the exhaust port opens. Because the external atmospheric pressure is higher than the system pressure, the atmosphere will enter the system through the exhaust port to prevent the harm of negative pressure.
The system has a pressure state:
The power intake and exhaust valves remain closed when the system is under pressure
System emptying:
When the system is empty, a negative pressure difference is formed, and the air pushes the float downward. The dynamic quick intake and exhaust interfaces are opened, and air enters the air valve to avoid vacuum negative pressure in the system.
Installation of air valves:
- Air valves must be installed vertically, i.e. the buoy inside them must be kept in a vertical state to avoid affecting the exhaust.
- When installing, it is better to install with the partition valve, so that when it needs to be removed for repair, the system can be sealed and the water will not flow out.
- It is generally installed at the highest point of the system, which is conducive to improving the exhaust efficiency.
- Low system pressure is not only harmful to exhaust, but also increases the possibility of leakage.
Note:
- The installation position of the exhaust valve must be the highest point of the pipeline. In order to reduce the internal pressure of the system, it can reduce the pressure and prevent negative pressure.
- Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
- Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Features:
1The valve body is designed by pneumatic DC channel, with large size of inlet and outlet and sufficient flow. 2The integral float ball anti-blowing design prevents the high-speed air from blowing up the float ball prematurely and closes the exhaust port. 3Good sealing performance, effective leakage prevention, stable performance, long-term use. 4Made of selected high quality materials, it has excellent quality and good durability. 5Installation method is simple, is the perfect irrigation accessories, mostly used in gardening and horticulture planting.
Package List:
