Specification:
Item Type: Floor Drain
Material: Full Copper
Weight: Approx. 413g / 14.6oz
Panel Size: Approx. 10x10cm / 3.9x3.9in
Drainage Depth: 6cm
Suitable Sewer Pipe: 5cm
Installation Steps:
- First find a good water slope to ensure that the water can flow in from all positions, leave the tiles on the side of the floor drain, measure the size, and cut the gap to achieve the perfect effect.
- Cut the tiles and place them. For example, the floor drain size is 10cm x 10cm and cut to 10.5cm. Leave a little gap appropriately.
- Brush the cement mud around the back of the floor drain to make it adhere firmly to the ground and not brush too much.
- The center of floor drain faces the center of the drain pipe, put it into the pipe, and press it firmly. The floor drain level should be slightly lower than the tile surface.
- Wipe off excess cement and clean up ground garbage.
- After the cement is dry, install the floor drain core, which can be taken out for cleaning at any time.
- Close the panel cover, and the installation is complete.
Features:
1The builtin porous and high dredge filter screen, anticlogging, antireflow and antiodor. 2Effectively block flying insects in the pipeline and solve the problem of sewer odor from the root cause. 3Using highquality full copper material, finely polished, durable and corrosionresistant. 4This floor drain is suitable for kitchens, bathrooms, garages, basements, toilets and balconies. 5The filter is designed to reduce drainage blockage and prevent hair from entering and blocking the pipe. 6Handbrushed process, vintage appearance design, beautiful, delicate and practical.
Package List:
1 x Floor Drain
1 x Filter Screen
1 x Drain Cover
