Product Details:
Material: plastic
Dimensions: 70 x 65 x 105 mm
Open the battery door at the bottom of the feeder and insert alkaline batteries 2X "AAA" 1.5v size 5 batteries.
The product is energy-saving and environmentally friendly, and it can be used for no less than 6 months with a new battery.
Time setting:
A. The "Manual" button is for manual feeding, and the "Auto" button is for automatic feeding.
B. Press the "Auto" button and the light will turn on for 24 hours, indicating that the current feeding is immediately and the interval is 24 hours. Press the 12h light again, it means that the current feeding is immediately and the interval is 12h and then feeding again. Press it again, all lights are off, indicating that automatic feeding is canceled.
4. Manual operation: In addition to the automatic feeding function, each time the "Manual" button is pressed, the automatic feeder will immediately feed once.
5. Add food: This device is suitable for loading and feeding granular food. When adding food, please unplug the food box first, then turn the adjustment button to adjust the food outlet adjustment door to the minimum, unscrew the food box cover and put about 30 grams of food in the food box, and then align the food box cover with the button not covered. On the food box, and rotate the cover of the food box to make the buckle position on the food box and the buckle position on the cover buckle, then install the feeding box on the main shaft of the feeder and adjust the adjustment door of the food outlet to a suitable size. Can.
6. Clean the box body: remove the feeding box, open the lid of the feeder box, and clean the inside and outside of the feeding box.
7. Adjust the feeding amount: By adjusting the knob on the front of the feeding box, the feeding amount can be adjusted each time
8. Device placement: According to the shape of the fish tank, the feeder can be installed in two ways.
A. After installing the dovetail groove at the bottom of the main body of the feeder into the fixing bracket, tighten the fixing bracket screw on the side of the fish tank. Adjust the position of the feeder to ensure that the outlet of the food box is aligned with the opening of the fish tank.
B. Separate the two sides of the Velcro, tear off the self-adhesive on the back, and stick it to the appropriate position on the bottom of the feeder and the fish tank cover respectively, and then install the feeder on the appropriate position on the fish tank through the Velcro to ensure the food box. The discharge port is aligned with the opening part of the fish tank.
Package Contents:
Feeder * 1+Chinese and English instructions+a pair of AAA No. 7 batteries+a Velcro
