Product Introduction:
Size: 14cm long, 3.5cm wide, 3cm in hand diameter
Output voltage: 4-12V, 0.1V regulation
Motor: hollow cup motor/12V-12000 RPM
Display screen: OLED-0.78 inch/resolution 128 * 80
Battery capacity: 1800mAh
Working time: about 8 hours/8V
Charging time: about 2.5 hours
Charging interface: TYPE-C/5V/2A
Stroke: 4.0mm
Product features:
Tuffking new generation wireless battery pen adopts customized high-performance hollow cup motor, aluminum alloy material structure, hard anodized surface, reliable and durable; New upgrading of circuit hardware and software algorithm, more accurate and fast voltage regulation; Two startup modes are designed, namely, normal startup and enhanced startup, to adapt to different application scenarios; OLED high resolution display screen, rich and clear display content; With charging overvoltage protection and pin clamping protection:
Output short circuit protection, text reminder on display screen for various abnormal conditions.
Usage method:
- Connect the battery compartment clockwise to the motor section, and adjust the needle length.
- Startup/pause: It includes two startup modes. In shutdown mode, press the power button for a long time to enter the normal startup mode, then press the power button to start the machine, and then press the power button to stop the machine; In the shutdown state, double click the power button to enter the enhanced startup mode. A lightning sign appears. Then press the power button to start the machine. After 0.2 seconds, it rises to 10V and then drops to the current set voltage. Then press the power button to stop the machine.
- Shutdown: In the power on state, press the power key for a long time to shut down, and there is no key operation for 10 seconds. The brightness of the display screen decreases, saving power; Automatic shutdown after 5 minutes without output and 5 minutes without load with output. When the power is less than 5%, alarm the power is too low, and then shut down.
- Voltage regulation: click the+button to increase the voltage, 0.1V to increase, and long press the+button to increase the voltage quickly; Click - to decrease the voltage, 0.1V to decrease, and long press - to decrease the voltage quickly; Voltage range 4-12V.
- Charging: Plug in the TYPE-C charging cable to charge. When charging, the display screen will prompt "Charging", and after charging, the display screen will prompt "Charge complete".
Packing list:
1Tattoo pen+1 battery
