Product information:
The wireless receiver controller has the characteristics of high confidentiality, stable performance and low power consumption, and is convenient to use without using traditional jumper or DIP switch coding, only the wireless signal transmitted by remote control can be received and stored by the receiving controller to realize supporting use. This controller can learn multiple remote controls with different codes (such as 2262 and 1527). With working indicator light, the receiver is on, and the indicator light is on, which can clearly show the working status of the receiver.
II. Output mode
A. Signal self-locking-plug the short circuit into 2-3
B. Signal interlock-plug the short circuit to 1-2
C. Signal inching-short circuit is empty, not shorted
Explanation of the meaning of self-locking/interlocking/inching:
Interlock: Press one key corresponding to remote control, turn on the corresponding relay, and then press another remote control key; The relay is disconnected.
Non-locking, inching: press the remote control key, the corresponding relay is turned on, release the remote control key; The corresponding relay is disconnected.
Self-locking: press the remote control key once, the relay is turned on, press the remote control key again, and the relay is disconnected.
III. Learning methods
Press the learning key. The learning indicator light is on, indicating that the learning state is entered. Press any remote control key to send a signal. The indicator light is on for 1 second, indicating that the learning is successful.
Tips:This controller can learn multiple remote controls with different codes. If it exceeds the code, the first one is automatically cleared.
Code clearing method: press and hold the learning button for about 8 seconds, and the indicator light turns on to off. At this time, press the remote control receiving switch without response, indicating that the code is successful.
IV. Technical parameters
1. Working voltage: DC12V (or 24V needs to be customized)
2. Work Current:6mA
3. Working temperature:-20- 60
4. Receiving frequency: 315MHz 433MHz, etc.
5. Receiving sensitivity:-105Db
6. Output voltage: AC and DC optional
7. Output current:10.0
8. Size: 50*32.8 * 15mm
Packing list:
1x remote control + 1x remote control switch
Product Image:
