MG995 MG996R metal copper gear steering gear / 55g servo / remote control car / boat / 13 kg high torque steering gear
01: Structural material: simulated metal copper teeth
02: Cable length: 30 cm, signal line (yellow line), red line (power line), brown (ground line)
03: Size: 40.7 * 19.7 * 42.9mm
04: Weight: 55g
05: Response speed: no load speed 0.17 seconds / 60 degrees (4.8V); 0.13 seconds / 60 degrees (6.0V)
06: Stall torque;
07: Working dead zone: 4 microseconds
08: Plug Specifications: JR FUTABA Universal
09: Working voltage; 3.0V-7.2V
10: Working torque: 13KG / cm
11: Operating temperature: -30 ~~ + 60 degrees Celsius
12: Suitable models: biped robot / manipulator / remote control car, suitable for class 50-90 methanol fixed-wing aircraft and
26cc-50cc gasoline fixed-wing aircraft and other models
13: Attachments; steering wheel, fixing screws, rubber sleeves and aluminum sleeves.
The control of the servo generally requires a time base pulse of about 20ms, and the high-level part of the pulse is generally an angle control pulse part in the range of 0.5ms-2.5ms, with a total interval of 2ms. Taking a 180-degree angle servo as an example, the corresponding control relationship is like this:
-
5ms -------------- 0 degrees;
-
0ms ------------ 45 degrees;
-
5ms ------------ 90 degrees;
-
0ms ----------- 135 degrees;
-
5ms ----------- 180 degrees;
Uses: 1:10 and 1: 8 flat sports cars, off-road vehicles, trucks, big wheels, climbing cars, biped robots, manipulators,
RC boat, suitable for models of class 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft.
360-degree steering gear: Actually equivalent to a stepless speed reduction motor that can control speed and direction. There is no function of 0-360 degree angle control. The control method is the same as the control signal of the general servo. Suitable power source for power conversion
(When the high level is 1 millisecond to 1.5 milliseconds, the servo rotates in the forward direction (the fastest rotation speed is 1 millisecond, the slower it is closer to 1.5 milliseconds, and the servo stops at 1.5 milliseconds). The servo reverses in milliseconds (the servo stalls at 1.5 milliseconds, the faster the reversal speed is closer to 2 milliseconds, and the fastest reversal at 2 milliseconds)
