How to use:.
Keep the back clean before ironing, and adjust the temperature to 130-150 according to the method of using the iron.
Or adjust the temperature of the clothes material according to the instructions of the iron.
Put the cloth sticker in the proper place and iron it back and forth a few times, usually about 15 seconds.
In order to prevent waste, you can put a thin cotton cloth on the cloth (must be cotton, dont use
Faded cloth). After ironing, check the edge to see if it is ironed well. It is best to repeat it several times.
The temperature should be determined according to the thickness of the applique. If it is thicker, the temperature must be higher and the hot time
Longer. For particularly thick cloth stickers, you can put a thin cotton cloth on the back and iron a few times.
The best way to add weeks is to sew a few stitches on the side of the cloth with a needle and thread after ironing, so that it is more firm.
Also very convincing.
The method without an iron: If you don't have an iron at home, you can also use the same color thread to sew the cloth on the clothes.
Notes: For cloth stickers with sequins or bright surfaces (because sequins are plastic products)
Put a layer of cloth and iron at low temperature (below 150), or use a steam iron directly, or put a pad on it
Layer wet cloth. So as not to cause the plastic sheet to melt due to high temperature.
