Product information:
Prepare a GBC, remove the back cover, pick up the screen cable, and separate the motherboard from the old screen.
Tear off the original layer of double-sided tape
Remove the shell of the area marked by the red line
Renovation complete
1. Attach double-sided tape
2. Put on the insulation sticker
3. Tear off the protective film
The screen is close to the top and right side.
Make sure that the top infrared top cover is in place before sticking the screen to the upper right corner.
Cut off a part above the cross key
Install the cable and buttons and connect the cable to the motherboard.
Remove the infrared baffle, stick the touch wire to the groove on the back of the baffle, and solder the cable interface contact on the other end.
Finished.
Features:
Four points in one point to point display without any stretching or deformation of the screen ratio.
Wide color gamut, ultra-high contrast ips screen, viewing angle up to 178. The same screen used by gba gbasp's ips highlight screen.
The display quality is no different from the previous two models.
Touch brightness adjustment.
Packing list:
Touch wire 1
Flat cable1
LCD screen1
Double-sided tape1
Insulation sticker*1
